AUTHORIZED DEALER
SYNZILLA.com LLC
Michael Mathe
Save Time. Order Online.
Two Ways to Save

AMSOIL TECH BLOG

07/01/2012

Motorcycles Have Specific Requirements That Automotive Oils May Not Address

One of the sure signs of summer is the abundance of motorcycles operating on the roads across North America. And if it seems like there are more motorcycles than ever on the highways and byways, that's because there are. In 2012, nearly 9.5 million motorcycles were registered in the U.S. alone. That figure has grown by more than 47% since 2002, when the total was slightly more than 5 million. Motorcycle culture and the thrill of the open road bring thousands of new riders and enthusiasts into the hobby every year. Although many "gear heads" love working on their bikes, few want to be doing repairs or experiencing downtime from riding that could be prevented by basic maintenance. As with any vehicle powered by an internal combustion engine, proper lubrication is essential to ensure performance and longevity.

In the past, it was common for motorcycles to run on engine oils designed for four-stroke automobile engines. And if you spend any time on online motorcycle forums, you'll see plenty of folks still advocating the use of automotive oil for motorcycles. What is their rationale? They're looking to save a couple bucks on a quart of oil, as the majority of oils blended specifically for motorcycle applications are more expensive per quart than their automotive counterparts. But is using auto oil in your motorcycle a good practice?

There are several reasons why motorcycle oils are better for your bike than automotive oils.

Motorcycles have fundamentally different lubrication requirements than automobiles. This is due primarily to differences in both engine design and vehicle applications. Motorcycles often operate under more severe conditions than passenger cars. They usually run faster, are air-cooled and share an oil sump between the engine, clutches and gears. The oil, therefore, must lubricate not only the engine, but the transmission and, in the case of wet-clutch motorcycles, the clutches, too. Many automotive oils, because of fuel economy requirements, are now formulated with friction modifiers. In a motorcycle with a wet clutch, these additives cause clutch slip and power loss.

Operating habits are different, too. While many of us rely on a car or truck for year-round day-to-day transportation and for longer road trips, motorcycles are often ridden seasonally, on weekends or on shorter trips. These trips often occur during warm summer weather, when the cooling system has to work even harder. Thus, a motorcycle lubricant must protect against high temperatures and high engine rpm while providing smooth wet-clutch operation and protecting gears and chains from operational pressure extremes. Because of these factors, many motorcycle oils are engineered with high viscosity to help prevent gear pitting, oil burn-off and oil consumption.

Retaining that viscosity is critical to ensure components remain protected. The high rpm and shared oil sumps common to motorcycles create an environment that promotes shearing. In fact, transmission gear sets are the leading cause of shear-induced viscosity loss in motorcycle applications. The oil's shear-stability and viscosity retention are vital for protecting motorcycles.

Additionally, motorcycles are often stored for several months during winter - a time when condensation can cause rust, which accelerates wear and can damage engine components. Rust is also a problem inherent to the shorter drive times motorcycles often endure. If not combated, rust can cause bearing corrosion which results in vibration, noise, increased temperatures and catastrophic failure. Effective motorcycle oils must include rust inhibitors to keep engines and components free from corrosion.

Motorcycle oils must also prevent foam from forming, which happens when air enters the lubricating oil during normal engine and transmission operation. Foam bubbles entering a lubricated area take the place of the lubricant film and compress easily, leading to metal-to-metal contact. Foam also promotes increased oxidation because more of the oil's surface area is exposed to oxygen. An oil's tendency to foam should be considered when selecting an oil for your motorcycle.

For many riders, motorcycles represent significant investments of thousands of dollars. It only makes sense to protect those investments with products tailored to address their specific lubrication requirements. Published, AMSOIL Magazine 07/12.

SYNZILLA.com LLC is a large nationwide Dealer of AMSOIL Synthetic Lubricants and is now expanding into your area and surrounding states. If you have a business or are an individual with several vehicles, AMSOIL has several options available that may allow you to Purchase AMSOIL Products at Wholesale Prices. We can show you how to save money and extend equipment life with AMSOIL Synthetic Motor Oils, Lubricants, Filters and Fuel Additives. Please visit the AMSOIL Online Store for more information and to purchase AMSOIL Products.

SAVE APPROXIMATELY 25% ON EVERY ORDER
Register as an AMSOIL Preferred Customer and save approximately 
25% on all AMSOIL products.
- FREE subscription to AMSOIL Magazine
- Premium protection and performance for all of your vehicles and equipment

- Access to the entire AMSOIL product line at wholesale prices

POPULAR LINKS