AUTHORIZED DEALER
SYNZILLA.com LLC
Michael Mathe
Save Time. Order Online.

AMSOIL Blog

AMSOIL Synthetic Motor Oils, Lubricants, Filters and Fuel Additives

AMSOIL Advanced Technology Delivers Premium Protection and Performance

11/11/2015


Turbochargers Create Conditions Best Suited for AMSOIL Synthetic Motor Oils

The industry trend toward smaller engines that deliver increased power and fuel efficiency has been well documented. The AMSOIL Newsstand contains several articles about the key technologies that enable today’s advanced engines – turbochargers, gasoline direct injection (GDI) and variable valve timing (VVT). These articles have mainly addressed how these technologies affect motor oil.

In short, they’re brutal on oil. It’s one of the reasons more automakers are installing synthetics at the factory.

Fuel dilution can be a problem

To summarize, GDI technology locates the fuel injectors directly in the cylinder (hence the name), as opposed to the manifold. This arrangement allows for greater control over injection, allowing engineers to fine-tune engines for greater efficiency and power. A side-effect of this process, however, is fuel contaminating the oil. As fuel is sprayed into the combustion chamber, it can wash past the rings and down the cylinder walls, into the oil sump. Ford* has seen the issue frequently enough to release a technical service bulletin (14-0040) titled “Fuel Odor From Engine Oil and/or Engine Oil Level Overfull” to address F-150 trucks equipped with the 3.5L Ecoboost* engine. Fuel dilution varies by engine type and driving conditions, with some vehicles showing no issues.

There are two main side-effects of fuel in the oil. First, fuel thins the oil, sometimes reducing the viscosity below the specified grade. If not accounted for in the design of the engine, this can affect wear rates and have an effect on systems that use the oil to function, like VVT.

Second, significant fuel contamination increases the rate of oil degradation. For these reasons, oil analysis labs typically condemn oil samples when the fuel content is greater than 5 percent.

Low-quality oils no match for turbos

Many GDI engines are turbocharged (TGDI). Turbos push more air into the combustion chamber, and tuning for efficiency can improve fuel economy, especially when combined with other technologies, such as direct injection. Operating at up to 150,000 rpm on exhaust gases that can exceed 1,000°F, turbos create extreme conditions that can cause low-quality oils to quickly break down, creating deposits and shortening the life of the oil. By 2020, industry experts predict nearly every new vehicle sold will come equipped with GDI technology, and the vast majority will be turbocharged.

Many motorists – and even more in the future – probably see only the tremendous benefits of improved power and fuel economy from their TGDI vehicles. Most don’t realize the toll modern engines take on motor oil.

Like most vehicle manufacturers, AMSOIL has long recommended different service intervals based on “normal” or “severe” driving conditions. Turbocharged vehicles are automatically included in the severe service category due to the extreme heat they generate. To ensure customers have the information they need to properly maintain their vehicles, a notice will soon be added to the AMSOIL Product Guides at www.amsoil.com that reminds owners of turbocharged vehicles to follow the severe-service recommendation. That means customers using Signature Series Synthetic Motor Oil in TGDI engines can extend drain intervals up to 15,000 miles/700 hours/12 months, whichever comes first, and should only extend oil changes beyond that with the guidance of oil analysis.

AMSOIL synthetic motor oil delivers superior protection

As proven in numerous tests, AMSOIL Synthetic Motor Oils deliver outstanding protection for these challenging engines. For example, the TEOST Test (see graph) determines an oil’s tendency to form deposits at high temperatures and is a good indicator of turbocharger protection. In the test, Signature Series 5W-30 Synthetic Motor Oil minimized deposits and easily surpassed API SN requirements. In the extreme heat of the Sequence IIIG Test, Signature Series scored 86 percent better for piston deposits than required by API SN, even after doubling the length of the test.

As modern engines become more advanced and tougher on oil, AMSOIL is committed to formulating synthetic lubricants that help you get the most out of your vehicle.



Note: These test results describe and represent properties of oils that were acquired November-December 2012. Results do not apply to any subsequent reformulations of such oils or to new oils introduced after completion of testing. All oils were available to consumers at the time of purchase. Testing was completed February 2013 by an independent, third-party lab. Formulations were coded to eliminate bias, and samples were tested in random order. An appropriate number of trials of each oil were run to produce results at the 95 percent confidence level when compared to AMSOIL Signature Series Synthetic Motor Oil.

If you have a business or are an individual with several vehicles, AMSOIL has several options available that may allow you to Purchase AMSOIL Products at Wholesale Prices. We can show you how to save money and extend equipment life with AMSOIL Synthetic Motor Oils, Lubricants, Filters and Fuel Additives. Please visit the AMSOIL Online Store for more information and to purchase AMSOIL products.
SAVE APPROXIMATELY 25% ON EVERY ORDER
Register as an AMSOIL Preferred Customer and save approximately 
25% on all AMSOIL products.
- FREE subscription to AMSOIL Magazine
- Premium protection and performance for all of your vehicles and equipment

- Access to the entire AMSOIL product line at wholesale prices

POPULAR LINKS